HP Designjet T2300 eMFP – Preliminary Review

HP Designjet T2300 eMFP and ePrint & Share is the first-ever wide format printer that comes with web-ready printing system with MFP benefits. The new HP Designjet T2300 eMFP promotes sophisticated workflows with HP ePrint & Share.

HP Designjet T2300 eMFP

Compare HP Designjet T2300 eMFP with HP Designjet T1200 HD MFP

The HP Designjet T2300 eMFP has integrated the HP Designjet wide format printer, 36-inch large format scanner and the PC that served as the connectivity interface for both scanner and printer into one single device.

HP Designjet T1200 HD MFP

Printer Specifications:

There is no significant improvement in term of print productivity. The mechanical printing time exclude file processing time is still maintain at 28 seconds per A1 size with Economode on.

In term of color images printing, the HP Designjet T2300 eMFP is able to produce 41m2/hr (445 ft2/hr) with ‘Fast’ settings under Economode as compared to 51m2/hr (549 ft2/hr) for HP Designjet T1200 HD MFP under the same settings.

But there is no improvement on printing speed for images printing with ‘Best’ settings. Both HP Designjet T2300 eMFP and HP Designjet T1200 HD MFP mechanical printing time for color images at ‘Best’ settings with Economode on is 3.1m2/hr.

The print quality of HP Designjet T2300 eMFP with Fast mode settings as compared with HP Designjet T1200 HD MFP with the same settings is questionable as the printer driver development of HP Designjet T2300 eMFP may had compromised the print quality in exchange with higher productivity.

Evaluation on this doubt will be published upon further review is done.

Optical Scanner Specifications:

Apparently HP Designjet T1200 HD Multifunction Printer comes with a better performance and more versatile scanner.

The HP Designjet T1200 HD MFP color scanning speed is at 5.1cm/sec (2 in/sec) while the HP Designjet T2300 eMFP color scanning speed has reduced to 3.81 cm/sec (1.5 in/sec).

For black and white or greyscale scanning performance, the HP Designjet T1200 HD MFP is rated to be at 15.2 cm/sec (6 in/sec) while the HP Designjet T2300 eMFP is performing at 11.43 cm/sec (4.5 in/sec).

The media thickness for the HP Designjet T1200 HD MFP is up to 15mm (0.6 in) while the thickness allowance for the new HP Designjet T2300 eMFP has reduced significantly to 0.8mm (0.03 in).

It seems like a total downgrade on the scanning capability of the HP Designjet T2300 eMFP over the previous generation, HP Designjet T1200 HD MFP. A further review on the scan quality will be posted upon scanning test is done between them because the comparison need to made to justify if the scanning speeds of both series of MFPs are done under same quality settings.

Software Versatility:

The HP Designjet T2300 eMFP is a new milestone in the wide format printer world via its software capability.

Instead of performing file opening, sharing and sending via PC, the HP Designjet T2300 eMFP users have the option to perform some of these tasks via the touch screen user interface on the HP Designjet T2300 eMFP.

The HP Designjet T2300 eMFP executable tasks via the new touch screen interface with enhanced connectivity are as below:
1.    Scan and upload content to the Web.
2.    Print and share files over the Web/ touch screen (HP ePrint & Share)
3.    Print direct from USB memory device.
4.    Print to any web-connected HP Designjet (HP ePrint & Share)
5.    Share files via email links
6.    Etc.

HP Designjet T2300 eMFP Review in a Nut Shell:

This is a preliminary review on the HP Designjet T2300 eMFP with HP ePrint & Share.  It is definitely going to bring excitement to the wide format multifunction printer industry with the evolutional interface and advanced connectivity.

But, users are advised to go back on the fundamentals prior to decision making such as defining your needs as below:
1.    Print volume
2.    Copy volume
3.    Expected print productivity (Times needed to process, print and cut the paper, do not based on the mechanical printing time alone to make justification).
4.    Expected scan productivity (Times needed to scan a document at desired scanning quality).
5.    Existing technical documents workflows.
6.    IT Compliance and securities issues with the new connectivity features offered by HP Designjet T2300 eMFP.

Last but not least, the major concern of mine would be the practicality of having the scanner and printer totally integrated into one single device.

Concerns as below:
1. A scanner, being a static device, mounted on the dynamic device (while printing, the print head is driven to left and to right, this create vibration), would it deteriorate the scanning quality in long run? An optical device is highly sensitive to vibration as it will lead to focus point misalignment.

2. A dynamic device will normally have more down times than a static device. Will the downtime of the printer affects the scanner for HP Designjet T2300 eMFP?

3.  There are minimal mechanical parts for an optical scanner. The scanner will definitely outlast a printer for many times because the printer is considered a highly wear & tear device. Take HP Designjet T1200 HD MFP as example; if the printer is aged, and going for a replacement, the company has an option to maintain the scanner of the HP Designjet T1200 HD MFP, hence the capital investment would just be on the new large format printer.

Will HP Designjet T2300 eMFP has such flexibility?

*The large format scanner cost more than 2 times than a large format printer.

It is always a smarter way to focus on functionality and fundamentals over anything else.

Canon iPF750 vs. Canon iPF710 Review – What are the differences between Canon iPF750 and Canon iPF710 A0 Size Large Format Printer?

Canon iPF710 is reckon to be the most successful wide format printer model for CAD applications which has been launch by Canon under the sub brand imagePROGRAF.  In late 2009, Canon iPF750 has been introduced to strengthen the iPF series offering at A0 size technical document applications while maintaining the A0 size flagship model, Canon iPF710.

Canon iPF750 (36-inch/ A0)

Both Canon iPF750 and Canon iPF710 are categorized at medium end* A0 size wide format printer range. The differences between Canon iPF750 and Canon iPF710 which will be explained below serve as a buying guide to the A0 size large format printer users.

 *Medium end wide format printers (A0 size) for CAD applications available in the market as of 8th December 2010 are Canon iPF710, Canon iPF750, Canon iPF755, HP Designjet T770 (44”), HP Designjet T770HD (44”) and HP Designjet T1200.


Please read below for the review of the differences between Canon iPF750 vs. Canon iPF710:

1. Productivity- Printing Speed
Canon iPF750 takes approximately 48 seconds while Canon iPF710 takes approximately 55 seconds to process, print and cut an A0 size CAD drawing.

Canon iPF750 has improved the printing speed by approximately 13% over Canon iPF710.


2. Media Handling
Canon iPF710 media roll holder is located at the rear part of the printer. Users need to access at the back of the printer for media roll replacement.

Canon iPF710 rear view

Canon iPF750 is featured with front loading design. It means users can load the paper roll at the front of the printer without the need to move the printer away from the wall for paper loading at the rear part of the printer.

A part from the above, the Canon iPF750 has enhanced the paper/media loading design with the loading guide rail which automatic perform skew correction and alignment of the paper.


3. Space Saving Design 
Canon iPF750 has significantly reduced the physical dimension of the printer length from 1,507mm (Canon iPF710) to 1,304mm.

The Canon iPF750 space-saving design with fully front-accessible operation for flush wall installation is definitely a key feature for users with limited office space such as corporate towers, project site offices and SOHO (small office home office) environment.

Large Format Printer Length Comparison (Canon iPF series vs. HP Designjet series)

The above is an illustration to scale of the printer length of Canon iPF750, Canon iPF710, Canon iPF650, HP Designjet T770 (24-inch), HP Designjet T770 (44-inch), and HP Designjet T1200 (24-inch).


4. Ink Delivery System (Sub Ink Tank Design)
Canon iPF750 is the first imagePROGRAF 36-inch models to use individual sub-tanks for each ink color within the printer. Constantly reserving a preset ink level in the sub ink tank lets users replace ink tanks without having to stop printing. Even when ink runs out unexpectedly, users can continue printing using just the subtanks. This also enables full use of ink tank contents, eliminating wasted ink.

The ink volume in the sub ink tanks is equivalent to approximately 80 sheets of A1 plain paper for monochrome drawings depending on printing condition.


5. Media Cutter
The Canon iPF750 is equipped with dual blade design with lifetime durability and it is driven by an independent motor that improve the media cutting speed. Not user replaceable. Estimated yield of the Canon iPF750 dual blade rotary cutter is at approximately 100,000 pieces of plain paper.

The Canon iPF710 comes with the user replaceable cartridge type single blade cutter. The estimated cutter life span is at approximately 20,000 pieces of plain paper.

6. Accounting Functions
The Canon iPF750 Status Monitor is enhanced with the Accounting Manager that designed and built to collect Canon imagePROGRAF large format printer job log information and calculate printing costs. This collects job logs to identify who printed what document from what printer and calculates the number of pages and sheets printed together with printing costs.


7. Maintenance Cartridge Life Span
The life span of the MC-10 Maintenance Cartridge for iPF750 is 2 times more durable than MC-07 Maintenance Cartridge for iPF710.

Read Also:

1. Canon iPF650 vs. Canon iPF605 - What are the differences between Canon iPF650 and Canon iPF605 A1 Size Large Format Printer?

2. Large Format Printer - Size Does Matter?

Accounting Functions of Canon imagePROGRAF Large Format Printer

What is the cost per square foot for wide format printing?
What is the cost per square meter for large format printing?
What is the cost per print for this wide format printing job?

How much ink is consumed for this job?
What is the paper cost for large format printing?
Who printed the most jobs with this LFP?

The above questions concerning the variable cost of the large format printer are frequently asked by the users. The cost calculation process could be tedious and inaccurate. The printing cost accounting is even more critical for print shop operators.

The Canon imagePROGRAF Status Monitor is now enhanced with the Accounting Manager* that designed and built to collect Canon imagePROGRAF large format printer job log information and calculate printing costs. This collects job logs to identify who printed what document from what printer and calculates the number of pages and sheets printed together with printing costs.

*Accounting functions is available with Canon iPF650, iPF655, iPF750, iPF755, iPF6300, iPF6350 and iPF8300 only.

Canon imagePROGRAF Status Monitor – Accounting Manager User Guide

The Canon iPF Accounting Manager step-by-step user guide is explained based on actual working environment as below:

Printer model: Canon iPF650
Connectivity: LAN
Media: Plain Paper 

Price indication for PFI-102C, PFI-104M, PFI-102Y, PFI-102Bk, PFI-102Mbk ink tanks and A1 plain paper roll 50 meter length shall served as reference only.

1.    At Canon iPF650 printer driver, ‘Printing Preferences’ window, under ‘Main’ tab, click on the ‘Status Monitor’ button.

2.    Select ‘Accounting’ tab, press on the ‘Accounting’ button.

3.    Select ‘Unit Costs’ under the ‘Settings’ drag down menu.

4.    At ‘Ink’ tab, check on the ‘Use same price of all ink’, key-in the price of the ink tank, then press ‘OK’.

5.    Move on to ‘Paper’ tab, select media type (plain paper for this step-by-step user guide), and fill up the ‘media width’, ‘length’ and ‘price’ accordingly, then press ‘OK’.

6.    Upon the ink costs data are defined, the total job cost will be available at the job log (right hand side of the Accounting Manager window screen). Total cost for job printed with ‘Coated Paper’ is not available because we have not defined the paper cost yet.

7.    By double clicking on the selected job, a pop-up menu will appear with all the detail information such as job owner, printing time, total job cost, total ink cost, total paper cost, paper consumed (ft2 in this case), ink consumed in ml, etc. Please see below for the detailed cost information for 3 different print outs.

CAD drawing

Job cost analysis for CAD drawing

 

GIS map

Job cost analysis for GIS map

Poster

Job cost analysis for Poster

The Accounting Manager of the Canon imagePROGRAF status driver is just like an intelligent print cost calculator that will be able to provide you print cost data as below:

1. Ink cost, media cost per job.
2. Paper cost based on various media type
3. Paper cost based on the per square foot or per square meter.
4. Opportunity cost,  printing yield or operation cost that will be able to derive from print time per job
5.Etc.

Further analysis via Microsof Excel is possible as the data is exportable to Miscrosoft Excel worksheet or CSV format.